|
1432 Anti-Rak Flipper Door Slides |
ON CLOSEOUT: Our remaining stock on the 1432 slides and accessories will be noted below. We will continue to offer the model 123 flipper door slides, but our vendor does not offer the
1432's. So what we have left is all we will have of this type of pocket door slide. (note posted 8-23-10)
For vertically
mounted pocketing doors. Great for entertainment centers and armoires, or storage cabinets. Supports door heights up to 78". Additional hinges required for doors 36" to 78" tall. Door widths up to 26". Tall doors are accommodated by optional hinge carrier strip. Slides come in black finish. Lengths (shown below on what we have left). Hold out detent. 75 pound load rating.
1432 kits sold without hinges to give you options
for overlay and thick door applications. 40mm cup hinges and plates are available and sold separately (order the 1432 kits plus appropriate hinges from list below). Doors 15/16" thick or thicker must use thick door
hinges. Doors not to exceed 1-1/4" thick for 1432 slide applications. 35mm hinge packs available for normal thickness inset applications. Please note:
All slides come as a kit. You will have a top slide and a bottom slide per door. Pivot blocks also supplied with kits. All pricing is by the kit. Order one kit per door.
1432 kits sold w/o hinges. Also note:
The maximum slide length that will fit in your cabinet will be the depth of your cabinet less the thickness of your door (inset applications) and another 1/4". (Example: a cabinet depth of 23-1/2" will allow a 22" slide to fit if your door is 3/4" thick. But if your cabinet depth is 23" deep, and your door is 7/8" thick, the 22" slide will not fit, you would have to drop down to the 20" long slide.) Overlay applications do not need to accommodate the thickness of the door within the cabinet depth when determinging slide length.
Allow 2" of side clearance on each side of your cabinet for the slide, hinge, and "standard 3/4" thick" door. Allow 2-1/2" on each side for thick doors up to 1-1/4" thick. Do not design your cabinet to the
size of your television or stereo system and then plan pocket doors. These clearances must fit into your design process first. For double sets of bi-fold doors, single door thickness cannot exceed 1-1/4". When doing a
double bi-fold door application, your pairs of doors on the left and the right, fold back to back to each other. Thus increasing the thickness of the pocketing pair of doors, but increasing that thickness toward the
center line of the cabinet, not toward the slide mechanism. Double sets of bi-fold doors are only common with very wide openings. As long as the combined door weight of the pair does not exceed 75 pounds, you can do
this. The 1432 kits and 1332 kits are the exact same slides.
The 1332 kits just came with 2 hinges and 2 mounting plates, and screws for inset door applications.
|
|
Photos of the slide brackets, bearings, carrier strip kits, connecting clips, and Salice hinges are loading below.
If you would like to skip over the pictures loading below to view part numbers and
pricing, just scroll down on the page. You can scroll back up to view the pictures after they have loaded.
Close up of the slide bracket. The hinge mounting plate attaches to this bracket. Carrier strips also connect between the top and bottom bracket.
 |
Close up of the ball bearing slides.
 |
Hinge carrier strip kit. Each kit contains two strip members, 3 connecting clips, and screws.
 |
Close up of the hinge carrier strip. Elongated holes allow for choice in hinge mounting plate placement. Vast up and down adjustment is possible.
 |
The connecting clips and screws that come in the hinge carrier strip kits.
The Salice hinges shown to the right are photos of the self-closing hinges. Free swinging versions are available and part numbers are listed in the price chart below. |
Salice 40mm cup hinges used with Accuride Flipper Door Slides. Top hinge is the A00A7P used for Accuride 123 thick door applications. Second hinge down is the A00A7G used for 1432
thick door applications or normal inset applications. (Also used for 123 kit overlay applications.) Third hinge down is the A00A7A used for 1432 overlay applications. Then the cam adjustable mounting plate
is shown to the right.
 |
|
To view the actual installation instructions for the 1432/1332 Flipper Door Slides, please click this file link to download an Adobe Acrobat PDF file: 1432/1332 instructions PDF file 776 KB
|
Bookmark this page for your reference ~ CTRL D
1432
Flipper door slides sizes, part numbers & pricing. (one kit does one door) -order hinges separately.
|
Slide length |
Slide travel |
Part number |
Price (kit) |
15.94" (16") |
12.27" |
all gone |
|
17.94" (18") |
13.52" |
all gone |
|
19.94" (20") |
15.52" |
all gone |
|
21.94" (22") |
17.52" |
ACC-1432.22 (2 kits left) |
$76.46 |
23.94" (24") |
19.52" |
ACC-1432.24 (2 kits left) |
$82.64 |
25.94" (26") |
21.52" |
all gone |
|
27.94" (28") |
23.52" |
ACC-1432.28 (1 kit left) |
$90.18 |
| |
|
|
|
Note: the hinge packs, hinge carrier strips, and connecting clips below are also on closeout. |
Optional carrier strip kit
sold separately (includes 2 piece carrier strip, 3 connecting clips, and screws).
For doors 36" to 78" tall. |
For inset applications,
order hinge kit (includes 2 hinges,
2 mounting plates, and 2 spacers).
(We can still get 35mm hinges, just not in the hinge packs.) |
Carrier strip part # |
Price (kit) |
35mm hinge kit part number |
Price (kit) |
ACC-4180-0408-XE |
$18.71 (1 left) |
ACC-4180-0407-XE |
all gone |
For doors over 56" tall, 1-1/2 hinge carrier strips are required per door.
|
You can make your own hinge carrier strip out of wood if you like. The steel plate will provide better resistance against door warpage. |
|
Hinge carrier strip clips
Only needed when mounting more additional hinges to the carrier strips. Need one clip per extra hinge mounting plate.
Note: each
carrier strip kit comes with 3 already. |
About the connecting clips:
Your top and bottom hinge will mount to the slide brackets on the slides. Your hinge count above quantity 2 will mount to the carrier strip. 3 clips come with the carrier strip kits. In most cases, you will not need to order any extra connecting clips. |
|
Part number |
Price (each) |
|
|
ACC-4180-0412 |
$2.85 (12 left) |
|
|
SPECIAL APPLICATION ACCESSORIES
40mm cup Overlay and Thick Door application hinges and mounting plates from Salice®
(Salice hinges are available in an endless supply, they are NOT discontinued.)
|
| |
Type |
Part Number |
Price (each) |
Self-closing hinge |
for thick doors |
SAL-A00A7G |
$4.52 each |
Free-swinging hinge |
for thick doors |
SAL-A00A5G |
$4.48 each |
Self-closing hinge |
for overlay doors |
SAL-A00A7A |
$4.42 each |
Free-swinging hinge |
for overlay doors |
SAL-A00A5A |
$4.35 each |
Hinge mounting plate |
|
SAL-AAR3E0 |
$1.23 each |
Ordering notes:
- order one flipper door kit per door
- 1432 kits sold w/o hinges
- order one hinge and one hinge mounting plate PER FOOT OF DOOR HEIGHT per door (minimum of two per door is mandatory). A 36" door is fine with 2 hinges. But for example, if your door is 38" tall, use 3 hinges; if
47" tall, use 3 hinges; if 49" tall, use 4 hinges, etc.
- hinge carrier strips are recommended in all applications of doors 36" or taller but not mandatory
- do not use carrier strip kits for doors under 36" tall, they will not fit - strips are 28-1/2" long - We reccomend the Accuride 123 Flipper Door Slides for smaller doors. It will save you money.
- order one carier strip kit per door 56" or under, and 1-1/2 for doors over 56" tall.
- if you are doing two doors over 56" tall, you will need 3 hinge carrrier strip kits (1-1/2 used per door)
- for doors over 36", it is a good idea to use one extra hinge per 11 to 12" of height, i.e. a 60" door should have 5 hinges per door. 36" tall doors are okay with 2 hinges.
- an extra hinge for really thick doors or heavier doors is always a good idea for added strength.
|
For lighter load Flipper Door Slides, check out the
123 series. |
