|
|
Below is a quick summary of the cabinet hinges we offer
Shown by manufacturer
What is face frame and Euro box cabinetry, click here for an answer.
|
|
AMEROCK DECORATIVE FACE FRAME HINGES
- face frame 3/8" inset
- face frame variable overlay
- many finishes to choose from
- old style H hinges
- reverse bevel hinges
- some restictions apply to ordering, some hinges require a minimum quantity.
|
CLASSIC BRASS HINGES
- several styles of barrel butt hinges
- some 3/8" inset hinges
- all available in 15 finishes to match the Classic Brass knob and pull choices
|
|
|
Various "concealed" hinge options that we can offer you
|
|
These are the WD-900CD hinges that can be shipped from Woodmont Doors with your door order. This is the only hinge we can get from them. Concealed face frame mount, 1/2" overlay, mounts to edge of face frame, 35mm bore, with dowels attached. This goes with Woodmont's B1 boring pattern of 3 holes.
Dowels are removeable if you wish to convert the hinge to a screw-on version. Thus the B2 boring method.
WD-900CD @ $5.00 per pair
|
|
These are the Blum Compact 38N hinges. These two hinges were known as the 900C and 900CD from Quality Doors. Extremely similar to the hinge just above, but these are the Blum brand. Available as a screw on version, to go with the B2 boring method, or as a knock-in (press-in) version, to go with the 3-hole boring pattern B1 shown above. 6-way adjustable. Looking at the picture below, you see two screws on the plate side of the hinge. One screw will adjust the hinge left to right, thus the tilt of your door. The other screw adjusts the hinge in and out, thus the tightness to your cabinet. Then the oval slotted hole between them gives you the height adjustment to tweak your hinge up and door to help align tops of doors to each other.
This hinge is for a 1/2" overlay which is by far the most common application in "face frame" cabinetry.
When we supply these hinges, we will include the necessary mounting screws too.
BLU-38N355C.08 @ $2.50 each - Screw-on, self-closing (no dowels, old 900C)
BLU-38N358C.08 @ $2.50 each - Press-in, self-closing (with dowels, old 900CD)
|
|
Blum Euro-box hinges for frameless applications.
When
you do not have face frame cabinetry and would like concealed hinges, these are the kind you want to use. Shown below are the overlay (by far the most common), and the inset
vesion of the Blum Cliptop 107 hinge. This means your cabinet door will open 107 degrees, which is quite normal. Blum also has hinges that open doors 120 degrees and 170 degrees.
We are just showing the 107 degree because that is all that is needed 99% of the time. If ordering in conjunction with Woodmont Doors, select boring method B2. These hinges are
available in press-in versions, but it is easier to offer them as screw-on. The reason being, if you are replacing hinges and keeping the same doors, do you know if your doors
have the Blum, Grass, Mepla, KV, Ferrari, Salice, etc. boring pattern? Not all are alike, and the dowels may not line up. With a screw on hinge, you don't have to worry about
dowel placement.
BLU-75T1550 @ $2.96 each - Cliptop 107 screw-on FULL overlay hinge, self-closing
BLU-75T1750 @ $3.04 each - Cliptop 107 screw-on INSET hinge, self-closing
BLU-175H7100 @ $1.37 each - Clip mounting plate, 0mm
|
|
Blum Compact 33 face frame mount hinges.
For more
adjustability in your overlay.
Blum Compact 33 hinges are 110 degree opening self-closing hinges, that when combined with the mounting plate of your choice will allow for face
frame overlays from 1/4" up to 1-5/8". A two-piece hinge and plate combination give you great flexibility. Plates we show below are edge mounted to the face frame. The second
pitcure shows how the hinge arm just slips into the mounting plate, then the set screw will tighten down.
Hinge can come as screw-on or press-in version. Attaches with #6x5/8"
wood screws.
BLU-33.360 @ $2.77 each
- screw-on hinge
BLU-33.363 @ $2.77 each - press-in hinge with dowels (not shown above)
BLU-130.1100.23 @ $1.32 each - 1/2" overlay mounting plate (most common size used)
All other sizes of mounting plates are also $1.32 each. The sizes are:
BLU-130.1100.24 = 1/4" overlay
BLU-130.1100.26 = 5/8" overlay
BLU-130.1100.22 = 3/4" overlay
BLU-130-1110.02 = 1" overlay
BLU-130.1120.02 = 1-1/8" overlay
BLU-130.1130.02 = 1-1/4" overlay
BLU-130.1140.02 = 1-3/8" overlay
BLU-130.1150.02 = 1-1/2" overlay
BLU-130.1160 = 1-5/8" overlay
|
|
Last but not least in our chosen selection of "concealed" cabinet hinges:
The Salice F series hinges.
This is the hinge we have offered for
years with the Accuride Flipper Door systems. It is a 40mm bore, thus you would have to bore the hole yourself, Woodmont only bores for 35mm hinges. This is considered a "thick
door" hinge, but you do not have to use it on just thick doors. What a thick door hinge does is just swing the door out farther away from the edge of your cabinet. This is why it
is a good hinge for the pocketing door systems. It is a great hinge to use, because it is incredibly strong. The 40mm cup and larger hinge arm make it a very tough hinge. We offer
it in self-closing and free-swinging versions.
SAL-A00A7A @ $4.42 each - FULL overlay, self-closing
SAL-A00A7G @ $4.52 each - HALF overlay, self-closing
SAL-A00A7P @ $4.68 each - INSET, self-closing
SAL-A00A5A @ $4.35 each - FULL overlay, free-swinging
SAL-A00A5G @ $4.48 each - HALF overlay, free-swinging
SAL-A00A5P @ $4.54 each - INSET, free-swinging
SAL-AAR3E0 @ $1.23 each - mounting plate, 0mm
|
|
|
|
